 |
Stainless Steel Buttweld Fittings are defined as a part used in a piping system, for changing direction, branching or for change of pipe diameter, and which is mechanically joined to the system. Buttweld fittings is a butt-welded connected stainless steel pipe fittings, it is easy for installation and maintenance. In fact, we are not only do stainelss steel fittings, as well as alloy steel and special alloys, such as ASTM A234 WP5, WP11, WP12, WP91 etc, and nickel alloy C276, alloy 625, monel 400 etc.
We mainly manufacture and supply stainless steel buttweld fittings according to ASME B16.9, EN10253-4/-3 , including stainless steel elbow, equal/reducing tee, conc/ecc reducer, stainless steel cap, stainless steel stub end etc. We also manufacture and supply stainless steel butt weld fittings to ISO 05251, GOST 17380/17378/17375/17376/17379, JIS etc.
ASME/ANSI B16.9
ASME/ANSI B16.28
MSS SP-43
MSS SP-75
DIN/EN 10253 -3/4
ISO 5251
JIS B2311/2312/2313
GOST 17375/17376/17378/17379
ASTM A403 304/L, 304H 310S, 310H 316/L, 316Ti, 316H 317/L 321/H 347/H S31803 S32750 904L 254SMO (S31254)
ASTM A815 UNS S31803, S32205, UNS S32750, S32760
Alloy 200, Monel 400, K500, Inconel 600, 625, Incoloy 800, 800H, 800HT, 825, alloy 20, alloy28, hastelloy C22, C276 etc.
Cu70Ni30(C71500, B30), Cu90Ni10(C70600,B10)
Gr. 1, Gr.2, Gr.11 etc.
ASTM A234 WPB, WPC
ASTM A420 WPL3, WPL6
ASTM A234 WP5, WP9, WP11, WP12, WP22, WP91,WP911,WPR
ASTM A860 WPHY42, 46, 50, 52, 56, 60, 65, 70
*The listed materials are for reference only, some materials will upon the quantity because we may have no raw material in stock. We are strength to supply stainless steel 304 weld fittings, 316 fittings, duplex S31803 fittings etc.
**DIN/EN equivalent grade is available, but sometimes we will use ASTM/ASME material to replace if the quantity is not considerable or the material is difficult to get. We will mark it in the offer.
Stainless Steel Buttweld Fittings are defined as a part used in a piping system, for changing direction, branching or for change of pipe diameter, and which is mechanically joined to the system. Buttweld fittings is a butt-welded connected stainless steel pipe fittings, it is easy for installation and maintenance. In fact, we are not only do stainelss steel fittings, as well as alloy steel and special alloys, such as ASTM A234 WP5, WP11, WP12, WP91 etc, and nickel alloy C276, alloy 625, monel 400 etc.
We mainly manufacture and supply stainless steel buttweld fittings according to ASME B16.9, EN10253-4/-3 , including stainless steel elbow, equal/reducing tee, conc/ecc reducer, stainless steel cap, stainless steel stub end etc. We also manufacture and supply stainless steel butt weld fittings to ISO 05251, GOST 17380/17378/17375/17376/17379, JIS etc.
ASME/ANSI B16.9
ASME/ANSI B16.28
MSS SP-43
MSS SP-75
DIN/EN 10253 -3/4
ISO 5251
JIS B2311/2312/2313
GOST 17375/17376/17378/17379
ASTM A403 304/L, 304H 310S, 310H 316/L, 316Ti, 316H 317/L 321/H 347/H S31803 S32750 904L 254SMO (S31254)
ASTM A815 UNS S31803, S32205, UNS S32750, S32760
Alloy 200, Monel 400, K500, Inconel 600, 625, Incoloy 800, 800H, 800HT, 825, alloy 20, alloy28, hastelloy C22, C276 etc.
Cu70Ni30(C71500, B30), Cu90Ni10(C70600,B10)
Gr. 1, Gr.2, Gr.11 etc.
ASTM A234 WPB, WPC
ASTM A420 WPL3, WPL6
ASTM A234 WP5, WP9, WP11, WP12, WP22, WP91,WP911,WPR
ASTM A860 WPHY42, 46, 50, 52, 56, 60, 65, 70
*The listed materials are for reference only, some materials will upon the quantity because we may have no raw material in stock. We are strength to supply stainless steel 304 weld fittings, 316 fittings, duplex S31803 fittings etc.
**DIN/EN equivalent grade is available, but sometimes we will use ASTM/ASME material to replace if the quantity is not considerable or the material is difficult to get. We will mark it in the offer.
